Unbrick LG G4 Brick hs-usb Qdloader 9008 Without Box

Unbrick LG G4 Brick hs-usb Qdloader 9008
  

Credit Goes To
Alnajat Soft Team
Engineer
Mohammed Alshikh


Model Supported
H815
H818
H818N
H818P
H819
LS995
LS991
H811


Files Link







1. Download
QPST.WIN.2.7-00430-GENERAL

Run setup.exe

Windows [Start] button >> Allprograms >> QPST >> QFIL
installation confirmation



2. Download
Qdload9008_HSUSB_Driver

Install Drivers




3. D / L via QFIL



To force QDloader download mode, connect the FORCED_USB emmc section with a jumper.
Or pressing key combination (volup + voldown) and poweron to boot Emergency D / L mode


After two points in the red circle are shorted and connected by power or USB connection, Qdloadmode can be entered and connected to QFIL



In Emergency D / L mode, check the port in Device Manager after connecting USB -> QS





Windows [Start] button >> All programs >> QPST >> Run QFIL



Select Port
1. Click the "Select Port" button

If you deselect Show Non Diagnostic Port, only the "Diagnostic" or "QDLoader" port will be visible
Selecting the port identified by Device Manager





MBN file selection

2. Click the "Browse" button

Select the file "prog_emmc_firehose_8992_lite_stable.mbn" in the folder where the images are stored.
For fusing samples, use images made for fusing.

ForFusingDevice: For Fusing Devices -> Download to LAF after recovery
NotForFusingDevice: for non-fused devices -> Restore and download



Select Build, RawProgram, Patch Check



Check RawProgram and Patch settings
Check the rawprogram0.xmlpatch0.xml file included
in the -Select Build path.
firehoseprogrammer MBN selected in the same folder
Rawprogram0.xml, patch0.xml are loaded.





SWDownload
4. Click the "Download" button
- The progress bar below is completed and the Download Succeed -> Finish Download message is confirmed.



Unbrick LG G4 Brick hs-usb Qdloader 9008 Without Box